System Information Block Type 5 in LTE

sib5 {

InterFreqCarrierFreqList [0] {

                           dl_CarrierFreq = 4

                           q_RxLevMin = -70

                           p_Max = -30

                           t_ReselectionEUTRA = 0

                           t_ReselectionEUTRA_SF {

                              sf_Medium = oDot25

                              sf_High = oDot25

                           }

                           threshX_High = 0

                           threshX_Low = 0

                           AllowedMeasBandwidth = mbw6

                           presenceAntennaPort1 = FALSE

                           CellReselectionPriority = 7

                           NeighCellConfig = { 2, 00xxxxxx }

                           q_OffsetFreq = dB1

                           q_QualMin_r9 = -3

                           threshX_Q_r9 {

                              threshX_HighQ_r9 = 10

                              threshX_LowQ_r9 = 11

                           }

                        }

InterFreqCarrierFreqInfo	can be specified up to 8 carrier frequencies
dl-CarrierFreq	carrier frequency helps the UE to search the cells
q-RxLevMin	Minimum RSRP value of the inter-frequency cell. Value -70 to -22 dBm. Actual value: signalled value * 2
p-Max	maximum allowed UL transmit power of the cell
t-ReselectionEUTRA	Defines the time to trigger for cell reselection. Value 0 to 7 sec.
t-ReselectionEUTRA-SF	scaling factors for Medium and High mobility
threshX-High	# Threshold (in dB) used by UE for cell re-selection to a HIGHER priority #  The Srxlev of the candidate cell is greater than threshX_High # Value 0 to 31 dB. Actual value= Signaled value * 2
threshX-Low	# Threshold (in dB) used by UE for cell re-selection to a LOWER priority #  Cell re-selection is allowed only when Srxlev of the candidate cell is greater than threshX_Low and RSRP of serving cell is less than the value of ThreshServingLow signalled within SIB3 # Value 0 to 31 dB. Actual value= Signaled value * 2
allowedMeasBandwidth	defined in terms of Resource blocks associated with a specific channel bandwidth
cellReselectionPriority	defines the Absolute priority of the frequency layer
neighCellConfig	information regarding the neighbouring cells
q-OffsetFreq	defines the RSRP measurement offset, applied to all cells on the specified RF carrier
intraFreqBlackCellList	the mentioned cells are no considered for cell reselection